GRP Plywood Panel Bolts.
These are the special bolts used to hold the GRP Panels on the Equitrek ShowTrekka, SpaceTrekka, etc horse trailers.
They can also be used on other trailers with 14mm thick grp panel sides.
These bolts have a sealing washer on the underside of the head to prevent water ingress and a locking compound pre-applied to the thread to stop them coming loose. They can only be used once so the old ones need to be renewed when a panel is repaired or replaced.
These are supplied as kits to enable you to replace individual panels as required.
They are also available in packs of 10 in my other items.
These kits contain enough fasteners to remove & replace the rear corner trim completely which makes it a lot easier to fit the new panel into place.
Please count the bolts on your trailer before ordering as the number originally fitted does sometimes vary!
NearSide (Left side) kits contains 37 Nuts/Bolts/Washers for the 14mm thick side panel plus 4 nuts/bolts/washers for the 17mm thick bulkhead as this has to be undone and angled backwards to gain access to some of the side panel bolts.
Rear Kits contain 41 Nuts/Bolts/Washers for the 14mm thick rear panel
Off Side (Ramp Side) kits contain 22 Nuts/Bolts/Washers for the 14mm side thick panel.
Supplied New and Un-painted. Painted ones are also available, see my other items.
All other fixings and components for these trailers are avaiable along with full rebuild kits including roof & window screws etc. See my other items or ask if the parts you need are not listed.
Outer Panel Bolts Specifications:
Grip Range: 15.5mm-17.4mm
Bolt Length: 16mm
Nut Length: 9.5mm
Recommended Hole Size: 10mm-10.3mm
Drive Bit: Torx T55
Assembly Torque:17nm-20nm
Bulkhead Panel Bolts Specifications:
Grip Range: 18.5mm-20.5mm
Bolt Length: 16mm
Nut Length: 12.7mm
Recommended Hole Size: 10mm-10.3mm
Drive Bit: Torx T55
Assembly Torque:17nm-20nm
© Copyright 2023. [4]